De-Dusting Machine,Roll Compactor,Tablet Press,Roller Compactor,Tablet Dies and Punches

Elevating De-Burring & De-Dusting Machine

TECHNICAL SPECIFICATION
Model	CM-DDEL-230
Output(for 8mm tablet ) *	5,000 to 2,50,000 Tablets / Hr.
Max. De-dusting Route (m)	6
Max. Upward Conveying (mm)	Approx. 460
Max. Tablet Diameter	16 mm
Min. Tablet Diameter	5 mm
Power Supply	220/230 V, 50 Hz / 1 Ph./ AC
Cleaning Air Source	0.1m3/min 0.15~ 0.2 MPa
Overall Dimension (mm)	530 (L) X 400 (W) X 1400 (H)
Net Weight	70 Kgs
Depending upon tablet shape & size

De-Dusting, De-Burring and Conveying by Vibration
The tried and tested vibration technique is the basis of these De-Dusters. Fine-tuning of the oscillating magnets with the spring assemblies causes the tablet to move forward, turning and rotating along the perforated spiral. This removes dust and burrs resulting from pressing are gently broken off.

Direct De-Dusting and Transport for any Tablet Press:
The De-Dusters can be used with any Tablet Press from any manufacturer.

Simple Disassembly for Cleaning
Loosening a Locking screws allows all the components mounted on a central shaft to be easily removed. The outer cylinder is pulled off after opening a collar. All components may be cleaned dry or wet, allowing optimal cleaning to be achieved in accordance with GMP standards.

Easy Maintenance and Cleaning
The new tablet De-Duster Model CBDE-250 combines gentle conveying, burring and De-dusting action with very Low noise level, user friendly and low maintenance, and easy cleaning operations as well. Vibration is limited to the spiral only, this allows rigid assembly.